We are often asked how to attach LEDs.   There are dozens if not hundreds of designs just on Thingiverse for attaching LEDs.   For the Prusa, we use this on...

The new spool holder design uses skate bearings to reduce friction.   The end caps, however, are tight and sometimes break. If so, the STLs to print a n...

Base:  6mm Front and 3mm Sides Our default acrylic thickness configuration is 6mm fronts and 3mm for everything else.   The reason...

Drilling holes in acrylic successfully is possible but requires you to be very careful.  Here’s how to do it: If the acrylic panel isn’t covered on the fr...

Many modifications to our stock designs are available for a nominal customization fee.  This covers the custom CAD modifications, laser layout, and test ...

First, the laser cuts at a *very* slight angle, so be sure to put the door back in the way it came. Next, place the case on its side so that the hinges ...